UCSS supports various router firmwares such as OpenWrt and Merlin.
Set Up guide for OpenWrt
There are available custom firmware based on OpenWrt that supports our services.
There are some risks associated with installing firmware. Please note that we cannot be held responsible for any problems that may occur during firmware installation or router failure. Please refer to the setting method after acknowledging the above.
UCSS customized firmware for GL-iNet.
Set Up guide for Merlin
The official version of Merlin were deleted the function using Shadowsocks. Merlin Koolshare Modified version should be used.
Merlin and Openwrt Koolshare modified ROM is a firmware customized by a third party. Please note that due to the nature of routers and firmware, UCSS does not provide support for router configuration, cannot be held responsible for troubleshooting firmware problems or router failures. Please refer to the setting method here after acknowledging.
The detailed setting method may vary depending on the model. Please search here for the setting method corresponding to each model.
Three types of plug-ins have been developed according to the compatible models. Please refer to the following link for compatible models.
How to Set Up UCSS on RT-AC68U
Download firmware of the applicable router.
Access the router and login
Router IP is normally set at http://192.168.1.1. If you can not find it please check the router IP from the control panel or system configuration > network.
Internet Explorer may not be able to connect normally. Please set it from Google Chrome which is the recommended browser of Koolshare.
Upload the firmware
“Administration” > “Firmware upgrade” > Upload the downloaded firmware to the new firmware file. Firmware rewriting is completed in a few minutes.
Select “Yes” for the two items in “Administration” > “System” > “Persistent JFFS2 Partition” and click “Apply”.
Be sure to perform this format. It hinders the operation.
Select “Merlin” of “Nat Loopback” in “Firewall” and “apply”.
Copy the subscription URL from the UCSS client area
Copy the subscription URL from UCSS “client area” > “service” > “product management”.
Install KoolSS (Shadowsocks plugin)
“科学上网” plugin has been deleted. Please download from the client area > download and install it from “离线安装” on the screen below.
Load the serveres
Since the plugin is displayed in “已安装”, click it to open it.
The next screen will pop up, so click “订阅节点”.
If it is not displayed, you can display the same screen from “更新管理”.
Paste the subscription URL in “订阅地址管理” along the screen below.
Choose the third “游戏模式” (Run with UDP and TCP) from the “订阅节点模式设定” just below it. Those who do not need UDP select the fourth “全局代理模式” (Global mode).
After setting, click “保存并订阅”.
A loading screen will be displayed and all server information will be loaded.
Setting up KoolSS
Select “运营商DNS” from 选择国内DNS > 运营商DNS. Select 选择国外DNS set to “ss-tunnel”. Click “保存&应用” after setting.
Select Server and Connection
Select a server from “节点选择”.
Then switch on with “科学上网开关”. The connection to the server is started with “保存&应用”.
If you want to turn off the connection to the server, you can switch at “科学上网开关” on this screen.